What is the battery capacity of Allview V2 Viper Xe?
The Allview V2 Viper Xe has a battery capacity of 2500 mAh
What is the display size of Allview V2 Viper Xe?
The Allview V2 Viper Xe has a display size of 5.0 inches
What is the operating system of Allview V2 Viper Xe?
The Allview V2 Viper Xe runs on Android 6.0 (Marshmallow)
How to reset or factory restore a Allview V2 Viper Xe device?
To reset or factory restore an Allview V2 Viper Xe device, there are several methods you can use. Here are the most common and recommended ways to do this:
Method 1: Using Hardware Buttons
1. Turn off the device by holding down the power button until the option to shut down appears.
2. Release the power button and select "Recovery mode" using the volume buttons.
3. If you are prompted to enter a password, enter the recovery password (default: 00000000000).
4. Use the volume keys to navigate to "wipe data/factory reset" and select it by pressing the power button.
5. Confirm the reset by selecting "Yes – delete all user data" and press the power button.
6. Wait for the device to reset and reboot.
Method 2: Using an Allview PC Suite Software
1. Download and install the Allview PC Suite software on your computer.
2. Connect your device to your computer using a USB cable.
3. Open the PC Suite software and select your device from the list of connected devices.
4. Click on the "Recovery" tab and select the "Recovery mode" option.
5. Follow the steps to enter the recovery password and select "wipe data/factory reset".
6. Confirm the reset and click on "Start".
7. Wait for the device to reset and reboot.
Method 3: Using an Allview-branded Recovery Image
1. Download the Allview-branded recovery image for your device from the internet.
2. Connect your device to your computer using a USB cable.
3. Enter fast boot mode on your device by holding down the power and volume down buttons until you see the fast boot menu.
4. Hexboot to recovery mode by selecting "Allview(V) Viper Xe (V) Service (V) Jump Bootloader" in the fast boot menu.
5. Use recovery mode to enter the recovery password (default: 00000000000) and reboot into recovery mode.
6. Wipe data/factory reset in recovery mode and reboot your device.
Note: Back up your important data before resetting or factory restoring your device. Restoring your device to its factory settings will erase all data and settings on your device.
