Allview P6 Lite

Home/ Allview/ Phones/ P6 Lite

Table of Contents

Summary

Allview P6 Lite Price

The retail price of a new or used/second hand Allview P6 Lite varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Allview P6 Lite across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of Allview P6 Lite?

3000 mAh

What is the processor of Allview P6 Lite?

MediaTek MT6735P

What is the internal storage of Allview P6 Lite?

16 GB

How to reset or factory restore a Allview P6 Lite device?

There are several ways to reset or factory restore an Allview P6 Lite device, depending on the situation. Here are the most common and recommended methods: 1. Resetting with buttons: * Turn off the device. * Press and hold the power button and the volume down button simultaneously for about 10 seconds until the device turns on in recovery mode. * In the recovery menu, select "Wipe data/factory reset". * Confirm the action and wait for the device to reset. 1. Resetting with a computer: * Connect your device to your computer using a USB cable. * Go to Allview's official website and download the latest firmware for your device. * Follow the installation instructions for the firmware, which may involve checking the device model, selecting the correct firmware, and following a few steps on your computer. * Once the firmware is installed, your device will be reset to its factory settings. 1. reset with fastboot command: * Install fastboot driver in your computer * Reboot your device in bootloader mode * Connect your device to your computer via USB cable * Open Command Prompt and type: fastboot erase system * Confirm the action by typing: fastboot reboot 1. Hard reset your device: * Press and hold the power button and the volume down button simultaneously for about 10 seconds until the device turns on in recovery mode. * In the recovery menu, select "Go to settings" --> "Backup & Reset" * Select "DATALINEAR CALIBRATION" * Follow the prompts to confirm the erase process. * Your device will be erased to its factory settings. It is recommended to back up important data before resetting your device, as this process cannot be reversed. Additionally, be sure to use a reliable source for the firmware if resetting with a computer, as downloading and installing the wrong firmware can damage your device.