Allview P4 eMagic

Home/ Allview/ Phones/ P4 eMagic

Table of Contents

Summary

Allview P4 eMagic Price

The retail price of a new or used/second hand Allview P4 eMagic varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Allview P4 eMagic across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of Allview P4 eMagic?

3000 mAh

How to reset or factory restore a Allview P4 eMagic device?

When it comes to resetting an Allview P4 eMagic device, there are several methods you can use. Here are the most common and recommended ways: Method 1: Using the Volume Up and Down Buttons 1. Turn off your Allview P4 eMagic device. 2. Press and hold the Volume Up button simultaneously with the Power button. 3. Keep holding both buttons for about 5-7 seconds until the device enters recovery mode. 4. In recovery mode, select "Wipe data/factory reset" using the Volume Down button. 5. Confirm the action by selecting "Yes -- delete all user data" with the Power button. 6. Wait for the device to reboot and complete the reset process. Method 2: Using the Power Button and the Reset Pin Hole 1. Turn off your Allview P4 eMagic device. 2. Use a paper clip or needle to press down on the reset pin hole located on the back of the device. 3. Hold down the reset pin for about 10-15 seconds until the device enters recovery mode. 4. In recovery mode, select "Wipe data/factory reset" using the Volume Down button. 5. Confirm the action by selecting "Yes -- delete all user data" with the Power button. 6. Wait for the device to reboot and complete the reset process. Note: Using the reset pin hole is not recommended because it voids the device's warranty and could cause permanent damage to the device if done incorrectly. Method 3: Using a Computer and the Allview Mobile Manager 1. Connect your Allview P4 eMagic device to a computer using a USB cable. 2. Open the Allview Mobile Manager application on your computer. 3. Click on the "Device Manager" tab and select your device from the list. 4. Click on the "Recovery" tab and select "Factory Reset". 5. Confirm the action and wait for the device to reboot and complete the reset process. Method 4: Using the Allview eMagic UI Service Center 1. Open the Allview eMagic UI Service Center application on your Allview P4 eMagic device. 2. Click on the "Factory Reset" option. 3. Confirm the action and wait for the device to reboot and complete the reset process. These are the most common and recommended ways to reset an Allview P4 eMagic device. Before proceeding with any of these methods, make sure to backup any important data so that you don't lose it during the reset process.