Allview 2 Speed Quad

Home/ Allview/ Phones/ 2 Speed Quad

Table of Contents

Summary

Allview 2 Speed Quad Price

At the time of it's release in 2013, September, the manufacturer's retail price for a new Allview 2 Speed Quad was about 120 EUR.

The retail price of a new or used/second hand Allview 2 Speed Quad varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Allview 2 Speed Quad across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of Allview 2 Speed Quad?

The Allview 2 Speed Quad has a battery capacity of 2000 mAh

What is the display size of Allview 2 Speed Quad?

The Allview 2 Speed Quad has a display size of 5.0 inches

What is the processor of Allview 2 Speed Quad?

The Allview 2 Speed Quad is powered by a Quad-core 1.3 GHz Cortex-A7 processor

How to reset or factory restore a Allview 2 Speed Quad device?

Resetting or factory restoring an Allview 2 Speed Quad device can be done in a few different ways, depending on the device's model or firmware version. Here are some of the most common and recommended ways: 1. Using the hardware keys: Most Allview devices come with a physical hardware key, usually located under the device's battery, that can be used to reset the device to its factory settings. To use this method, turn off the device and press and hold the hardware key and the power button together for at least 10 seconds. The device's screen should turn on and you'll be prompted to confirm the reset. If you confirm, the device will begin the reset process, which may take several minutes. 2. Using a computer and a USB cable: If your Allview device has a USB port, you can also reset it using a computer and a USB cable. Insert the USB cable into your computer and connect it to your device. Then, go to the Allview website, download the latest version of the device's firmware for your version, and extract it to a folder. Open a command prompt and navigate to that folder. Run the command "adb devices" to make sure your device is detected by your computer. Then, run the command "adb reboot bootloader" to reboot your device into recovery mode. In recovery mode, you can select "Wipe data/factory reset" to reset the device to its factory settings. 3. Using a recovery tool: There are several third-party recovery tools available that can be used to reset an Allview device to its factory settings. These tools usually require a computer and a USB cable, and may require root access on the device. Once you've downloaded and installed the recovery tool, connect your device to the computer, run the tool, and follow the instructions to reset the device to its factory settings. Note: Resetting your device to its factory settings will erase all data, including keywords and passwords, so use this method with caution! It's also important to only use the recommended and supported methods for resetting your device to ensure your data is protected.