Alcatel Watch

Home/ Alcatel/ Phones/ Watch
Alcatel Watch image - Nikonet125.com
An image of the Alcatel Watch.
Table of Contents


The Alcatel Watch is a discontinued device with a 1.22-inch IPS LCD, 256K colors display with a resolution of 240 x 204 pixels. It has no cellular connectivity and runs on Proprietary OS. It is powered by a STM 429 chipset with a 184 MHz processor and has 8MB RAM of internal storage. It has an IP67 dust/water resistant (up to 1m for 30 min) and a charger built-in the strap. It has a Li-Ion 210 mAh non-removable battery and comes in White and Black/Red colors.

Alcatel Watch Price

At the time of it's release in 2015, September, the manufacturer's retail price for a new Alcatel Watch was about 110 EUR.

The retail price of a new or used/second hand Alcatel Watch varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Alcatel Watch across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery life of the Alcatel Watch?

The battery life of the Alcatel Watch is up to 36 hours.

What type of processor does the Alcatel Watch have?

The Alcatel Watch has a Qualcomm Snapdragon Wear 2100 processor.

How to reset or factory restore a Alcatel Watch device?

Alcatel Watch devices can be reset or factory restored to their original settings if needed. There are two common methods for resetting an Alcatel Watch device: 1. Reset by OTA: Over-the-air (OTA) updates can be used to reset an Alcatel Watch device to its initial settings. This method requires an active internet connection and the Alcatel Watch device must be connected to the charger. To reset the device by OTA: * Go to the wearable app on your smartphone * Select Settings > Device Settings > Full System Reset * Then select "OK" to confirm and the device will restart 2. Reset by hard reset: A hard reset is a more thorough method for resetting an Alcatel Watch device. It will erase all data and settings from the device. This method requires a USB cable and you'll need to connect the device to your computer. To reset the device by hard reset: * Connect the Alcatel Watch device to your computer using a USB cable * Open the Alcatel Watch driver installation file on your computer * Select Support > Download and Load Firmware * Then select the firmware file and choose "Factory Reset" or "Erase Wipe Data/Factory Reset" * Then follow the on-screen instructions to complete the reset process It's important to note that factory resetting your Alcatel Watch device will erase all data, so it's recommended to backup any important data before resetting the device. Also, hard resetting the device will lock the device for 60 seconds before reviving it, so it's recommended to keep the device on charge until the reviving process is completed.

What type of operating system does the Alcatel Watch use?

The Alcatel Watch uses the Android Wear 2.0 operating system.


Specifications

Network

TechnologyNo cellular connectivity
2G bandsN/A
GPRSNo
EDGENo

Launch

Announced2015, September. Released 2015, September
StatusDiscontinued

Body

Dimensions41.8 x 41.8 x 10.5 mm (1.65 x 1.65 x 0.41 in)
Weight-
SIMNo
IP67 dust/water resistant (up to 1m for 30 min) Charger built-in the strap

Display

TypeIPS LCD, 256K colors
Size1.22 inches
Resolution240 x 204 pixels (~258 ppi density)

Platform

OSProprietary OS
ChipsetSTM 429
CPU184 MHz

Memory

Card slotNo
Internal8MB RAM
eMMC 5.1

Camera

No

Sound

LoudspeakerYes
3.5mm jackNo

Comms

WLANNo
Bluetooth4.0, LE
PositioningNo
NFCYes
RadioNo
USBUSB 2.0 (charging only)

Features

SensorsAccelerometer, altimeter, gyro, heart rate, compass
MP3 player Photo viewer Voice memo/dial/commands

Battery

TypeLi-Ion 210 mAh, non-removable

Misc

ColorsWhite, Black/Red
PriceAbout 110 EUR

Other Alcatel phones like the Watch