Alcatel Shine Lite

Home/ Alcatel/ Phones/ Shine Lite

Table of Contents

Summary

Alcatel Shine Lite Price

At the time of it's release in 2016, October, the manufacturer's retail price for a new Alcatel Shine Lite was about 200 EUR.

The retail price of a new or used/second hand Alcatel Shine Lite varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Alcatel Shine Lite across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of the Alcatel Shine Lite?

The Alcatel Shine Lite has a 2500 mAh battery capacity.

What type of display does the Alcatel Shine Lite have?

The Alcatel Shine Lite has an IPS LCD display.

How to reset or factory restore a Alcatel Shine Lite device?

There are two common and recommended ways to reset or factory restore an Alcatel Shine Lite device: Method 1: Using the device's settings menu 1. Turn off your Alcatel Shine Lite device. 2. Press and hold the Volume Up and Power buttons together until the phone enters recovery mode. Depending on your device, the exact combination of buttons may vary. 3. Once in recovery mode, use the Volume buttons to navigate and select the option to "wipe data/factory reset". 4. Confirm your choice by selecting "Yes" or "OK". 5. Wait for the phone to erase all data and reset to its factory settings. This process may take several minutes. 6. Once the reset is complete, use the Volume buttons to navigate and select "Reboot system". 7. Wait for the phone to restart and you should see the Alcatel Shine Lite logo on the screen. Method 2: Using a PC or Mac and your USB cable 1. Connect your Alcatel Shine Lite device to your PC or Mac using the USB cable. 2. Install the appropriate drivers for your device on your computer. You can usually find these drivers on the Alcatel website or by searching on Google. 3. Open a command prompt on your computer and enter the following command: "fastboot flash recovery recovery.img". 4. Replace "recovery.img" with the name of the recovery image file for your Alcatel Shine Lite device. You can find the name of the file on the Alcatel website or by searching on Google. 5. Wait for the flash process to complete. This may take several minutes. 6. Disconnect your device from your computer and turn off your device. 7. Press and hold the Volume Up and Power buttons together until the phone enters recovery mode. 8. Once in recovery mode, use the Volume buttons to navigate and select the option to "wipe data/factory reset". 9. Confirm your choice by selecting "Yes" or "OK". 10. Wait for the phone to erase all data and reset to its factory settings. This process may take several minutes. 11. Once the reset is complete, use the Volume buttons to navigate and select "Reboot system". 12. Wait for the phone to restart and you should see the Alcatel Shine Lite logo on the screen.

What version of Android does the Alcatel Shine Lite run?

The Alcatel Shine Lite runs Android 6.0 Marshmallow.

Specifications

Network

Technology: GSM / HSPA / LTE
2G bands: GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2
3G bands: HSDPA 850 / 900 / 1900 / 2100 - EMEA, APAC
: 2, 3, 4, 5, 7, 17, 27, 28 - LATAM
4G bands: 1, 3, 7, 8, 20, 38 - EMEA
Speed: HSPA 42.2/11.5 Mbps, LTE Cat4 150/50 Mbps

Launch

Announced: 2016, September. Released 2016, October
Status: Discontinued

Body

Dimensions: 141.5 x 71.2 x 7.5 mm (5.57 x 2.80 x 0.30 in)
Weight: 156 g (5.50 oz)
Build: Glass front (Asahi Dragontrail), glass back (Asahi Dragontrail), plastic frame
SIM: Single SIM (Nano-SIM) or Dual SIM (Nano-SIM, dual stand-by)

Display

Type: IPS LCD
Size: 5.0 inches, 68.9 cm2 (~68.4% screen-to-body ratio)
Resolution: 720 x 1280 pixels, 16:9 ratio (~294 ppi density)
Protection: Asahi Dragontrail Glass