Alcatel Pop D1

Home/ Alcatel/ Phones/ Pop D1

Table of Contents

Summary

Alcatel Pop D1 Price

At the time of it's release in 2014, September, the manufacturer's retail price for a new Alcatel Pop D1 was about 80 EUR.

The retail price of a new or used/second hand Alcatel Pop D1 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Alcatel Pop D1 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of Alcatel Pop D1?

The battery capacity of Alcatel Pop D1 is 1500 mAh

What is the display size of Alcatel Pop D1?

The display size of Alcatel Pop D1 is 4.0 inches

How to reset or factory restore a Alcatel Pop D1 device?

There are several methods to reset or factory restore an Alcatel Pop D1 device. Here are the most common and recommended ways: Method 1: Using the Volume Up and Power Buttons 1. Start by turning off the device by pressing and holding the power button for about 10 seconds until the device turns off completely. 2. Press and hold the volume up button and the power button simultaneously for a few seconds until the device vibrates. 3. Release all buttons and wait for the device to start resetting, which can take several minutes. 4. Once the device is reset, you may be prompted to set up the device. Follow the on-screen instructions to complete the setup process. Method 2: Using a Computer and the USB cable 1. Connect your device to a computer using a USB cable. 2. Install the Alcatel drivers on your computer, if they are not already installed. 3. Open your device's recovery settings by launching the Alcatel PC Suite software and selecting your device from the list. 4. Select the "Factory Data Reset" option and confirm your selection. 5. Wipe all data and user settings off your device, and then restart to the home screen. Method 3: Using a Computer and the recovery interface of your device 1. Connect your device to a computer using a USB cable. 2. Open the command prompt on your computer and navigate to the folder where the USB drive is connected. 3. Copy the firmware update files to the USB drive. 4. Transfer the firmware files to your device's recovery interface using the USB cable. 5. Enter the recovery interface on your device and choose the "Install from SD card" option. 6. Select the firmware files and confirm your selection. 7. Wipe all data and user settings off your device and restart to the home screen. It's important to note that factory resetting your device will erase all data, including any important files and personal information. Make sure to back up your important data before resetting your device or before using any of the methods listed above.

What is the processor of Alcatel Pop D1?

The processor of Alcatel Pop D1 is 1.2GHz quad-core

Specifications

Network

Technology: GSM / HSPA
2G bands: GSM 850 / 900 / 1800 / 1900
3G bands: HSDPA 900 / 2100
Speed: HSPA 21.1/5.76 Mbps

Launch

Announced: 2014, August. Released 2014, September
Status: Discontinued

Body

Dimensions: 112.2 x 62 x 12 mm (4.42 x 2.44 x 0.47 in)
Weight: 101 g (3.56 oz)
SIM: Mini-SIM

Display

Type: TFT, 256K colors
Size: 3.5 inches, 36.5 cm2 (~52.4% screen-to-body ratio)
Resolution: 320 x 480 pixels, 3:2 ratio (~165 ppi density)

Platform

OS: Android 4.4.2 (KitKat)
CPU: Dual-core 1.0 GHz

Memory

Card slot: microSDHC (dedicated slot)
Internal: 4GB 512MB RAM

Main Camera

Single: 2 MP
Features: HDR
Video: Yes

Selfie camera

Single: VGA
Video:

Sound

Loudspeaker: Yes
3.5mm jack: Yes

Comms

WLAN: Wi-Fi 802.11 b/g/n, Wi-Fi Direct, hotspot
Bluetooth: 4.0, A2DP
Positioning: GPS
NFC: No
Radio: Stereo FM radio, RDS
USB: microUSB 2.0

Features

Sensors: Accelerometer, proximity

Battery

Type: Li-Ion 1300 mAh, removable
Stand-by: Up to 433 h (2G) / Up to 325 h (3G)
Talk time: Up to 6 h 40 min (2G) / Up to 2 h 40 min (3G)
Music play: Up to 20 h