What are the main features of the Alcatel Pixi 3 (5.5) LTE?
The Alcatel Pixi 3 (5.5) LTE features a 5.5-inch IPS LCD display, a 1.3GHz quad-core processor, 1GB of RAM, 8GB of internal storage, and a 2,500mAh battery.
What type of SIM card does the Alcatel Pixi 3 (5.5) LTE use?
The Alcatel Pixi 3 (5.5) LTE uses a micro-SIM card.
What version of Android does the Alcatel Pixi 3 (5.5) LTE run?
The Alcatel Pixi 3 (5.5) LTE runs Android 5.1 Lollipop.
How to reset or factory restore a Alcatel Pixi 3 (5.5) LTE device?
There are two common and recommended ways to reset or factory restore an Alcatel Pixi 3 (5.5) LTE device:
Method 1: Using the Device's Menu
1. Turn off the device by holding down the power button for 30 seconds until it shuts down completely.
2. Press and hold down the power button and the volume up button at the same time for 20 seconds.
3. Release both buttons and then wait for the device to reboot.
4. Once the device has rebooted, you should see a menu with the options to choose either "Wipe data/factory reset" or "Clear user data".
5. Select the option "Wipe data/factory reset" and then "Yes - delete all user data".
6. Be sure to backup all important data on a separate device or cloud storage because this process will erase all data on your device.
7. Allow the device to wipe data and restore to factory settings.
Method 2: Using Recovery Mode
1. Turn off the device by holding down the power button for 30 seconds until it shuts down completely.
2. Connect your device to a computer using a USB cable.
3. Open the Alcatel Drivers Package on your computer, which you can download from Alcatel's website.
4. Click on the "RUU" file in the package and then select "Load" in the command line Prompt.
5. Be patient while the device is restored to factory settings. It may take several minutes.
6. Once the device has been restored, you can disconnect it from the computer and turn on the device to see if the problem has been resolved.
It's important to note that both of these methods will erase all data on the device, so make sure to backup important data before attempting a reset or factory restore. Additionally, the device may require a password to begin the process, so make sure to have that on hand.
