Alcatel Pixi 3 (10)

Home/ Alcatel/ Phones/ Pixi 3 (10)

Table of Contents

Summary

Alcatel Pixi 3 (10) Price

The retail price of a new or used/second hand Alcatel Pixi 3 (10) varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Alcatel Pixi 3 (10) across different regions, markets and countries.

Frequently Asked Questions(FAQs)

How to reset or factory restore a Alcatel Pixi 3 (10) device?

Resetting or factory restoring a device can be useful when the device is experiencing issues, such as slow performance or not functioning properly. For Alcatel Pixi 3 (10) device, here are the most common and recommended ways to reset or factory restore the device: Option 1: Hard Reset To perform a hard reset, turn off the device by pressing and holding the power button until the power menu appears. then, Select "Power off" and press OK. After a few seconds, hold down the Volume Up button and Power button together until the device enters recovery mode. Once in recovery mode, select "Wipe data/factory data" and confirm with OK. The device will erase all user data and return to its factory settings. Option 2: Soft Reset To perform a soft reset, turn off the device by pressing and holding the power button until the power menu appears. Then, select "Power off" and press OK. After a few seconds, press and hold the Volume Up button and Power button together until the device enters recovery mode. In recovery mode, select "Wipe cache/factory data" and confirm with OK. This will clear the device's cache, but not all user data. Option 3: Factory Reset via PC To perform a factory reset via PC, you will need to download and install the Alcatel Pixi 3 (10) drivers on your computer. Then, connect the device to your computer using a USB cable. Open a command prompt on your computer and enter the following command to check if the device is recognised by the computer: ``` fastboot devices ``` If the device is recognized, enter the following command to enter the bootloader: ``` fastboot reboot bootloader ``` After the device reboots into the bootloader, select "Factory Data Reset" and confirm with OK. The device will erase all user data and return to its factory settings. It's important to note that a factory reset will erase all user data on the device, including apps, contacts, messages, and other settings. Be sure to back up any important data before performing a factory reset. Additionally, it is recommended to use the official Alcatel Pixi 3 (10) recovery image to restore the device to its factory settings. This image can be found on the Alcatel website.