Alcatel Go Flip 3

Home/ Alcatel/ Phones/ Go Flip 3

Table of Contents

Summary

Alcatel Go Flip 3 Price

At the time of it's release in 2019, September 19, the manufacturer's retail price for a new Alcatel Go Flip 3 was about 80 EUR.

The retail price of a new or used/second hand Alcatel Go Flip 3 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Alcatel Go Flip 3 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery life of the Alcatel Go Flip 3?

The Alcatel Go Flip 3 has a battery life of up to 17 hours of talk time and up to 14 days of standby time.

What type of processor does the Alcatel Go Flip 3 have?

The Alcatel Go Flip 3 has a Qualcomm Snapdragon 210 processor.

How to reset or factory restore a Alcatel Go Flip 3 device?

If you want to reset or factory restore an Alcatel Go Flip 3 device, there are several steps you need to follow: Method 1: Using the Power and Volume Keys 1. Turn off the Alcatel Go Flip 3 device by holding down the power button for a few seconds until the device turns off. 2. Press the power button and the volume down key at the same time. This will enter you in to the recovery mode. 3. Once you are in the recovery mode, you will see a menu with several options. Select "Wipe data/factory reset" using the volume keys. 4. You will now be prompted to confirm that you want to factory reset the device. Select "Yes, delete all user data" using the volume keys. 5. The device will now begin the factory reset process which will take a few minutes. Once the process is complete, the device will reboot and you will be prompted to set it up as if it were a new device. Method 2: Using a Computer and the Alcatel Go Flip 3 USB Driver 1. Connect your Alcatel Go Flip 3 device to your computer using a USB cable. 2. Download and install the Alcatel Go Flip 3 USB driver on your computer from the manufacturer's website. 3. Open a command prompt on your computer and navigate to the directory where the USB driver is installed. 4. Type the following command and press enter: "adb devices" 5. If your device is detected on your computer, you will see its serial number in the command prompt. 6. Type the following command and press enter: "fastboot reboot bootloader" 7. Once the device has rebooted, you will be in the recovery mode. Follow steps 3-5 in the previous method to factory reset the device. It is recommended to use the first method of resetting the device as it is simpler and can be done directly on the device. However, if you want to backup your device before resetting it, the second method can be used to backup your data to your computer before resetting the device.

What type of display does the Alcatel Go Flip 3 have?

The Alcatel Go Flip 3 has a 2.8-inch TFT display with a resolution of 320 x 240 pixels.

Specifications

Network

Technology: GSM / CDMA / HSPA / LTE
2G bands: GSM 850 / 900 / 1800 / 1900
: CDMA 800 / 1900
3G bands: HSDPA 850 / 1700(AWS) / 1900
4G bands: 2, 4, 5, 12, 25, 26, 41, 66, 71
Speed: HSPA, LTE

Launch

Announced: 2019, September 19
Status: Available. Released 2019, September 19

Body

Dimensions: 104.9 x 53.1 x 20.1 mm (4.13 x 2.09 x 0.79 in)
Weight: 118 g (4.16 oz)
SIM: Nano-SIM

Display

Type: TN TFT LCD
Size: 2.8 inches, 24.3 cm2 (~43.6% screen-to-body ratio)
Resolution: 240 x 320 pixels, 4:3 ratio (~143 ppi density)
: Second external TN TFT display, 1.44 inches, 128 x 128 pixels