How to reset or factory restore a Alcatel 1c (2019) device?
The Alcatel 1c (2019) is a smartphone that runs on the Android operating system. There are several ways to reset or factory restore the device, which will erase all the data and settings on the phone, and restore it to its default state. In this answer, we will discuss the most common and recommended ways to reset an Alcatel 1c (2019) device:
Method 1: Using recovery mode and Stock firmware
One of the most common ways to reset an Alcatel 1c (2019) is by using recovery mode and stock firmware. Here's how to do it:
1. Turn off the device and then press and hold the power button and the volume down button at the same time until the recovery menu appears.
2. Once in recovery mode, select "Reboot system" and then "Wipe data/factory reset."
3. Select "Yes" to erase all data and settings.
4. After wiping the data, choose "Reboot system" and wait for the device to restart.
Method 2: Using the Stock Firmware downloaded from recovery mode
Another option is to use the stock firmware, which is the original software that was installed on the device when it was first made. Here's how to do it:
1. Turn off the device and then press and hold the power button and the volume down button at the same time until the recovery menu appears.
2. Once in recovery mode, select "Reboot system" and then "Wipe data/factory reset."
3. Select "Yes" to erase all data and settings.
4. After wiping the data, select "Reboot system" and wait for the device to restart.
5. Assuming the android version is 9.0Pi:
- Download the Stock firmware (Mostly found in xda developers or official alcatel website)
- Connect the phone to your computer and enable USB debugging.
- Boot the phone into recovery mode.
- Using ADB command line type "fastboot flash recovery (filename if had, otherwise leave it blank) recovery.img". Then Reboot recovery.
- In recovery mode, select "Install" and then "From SD card" then select the firmware file.
- Swipe to confirm the installation and wait for the installation to complete.
Method 3: Using an Android reset tool
An Android reset tool is a software that can be used to reset or factory restore an Android device. These tools are available online and can be downloaded on a computer or a mobile device. Here's how to do it:
1. Download an Android reset tool from a reputable website or app store.
2. Connect the device to your computer and launch the reset tool.
3. Select "Alcatel 1c" or "2019" from the list of devices.
4. Follow the prompts to enter the device details, such as the serial number, IMEI, and other necessary information.
5. Once the details have been entered, click on the "Reset" button and follow the instructions provided.
6. The device will start to reset, it may take a while depending on the model, this may progress to "Brick" or "dead" the device.
Note: It's important to note that resetting or factory restoring an Android device will erase all data and settings, including any important information, so make sure to take a backup of any important data before proceeding. Also, using a third-party reset tool or Android firmware may void the device's warranty. It's always recommended to check with the manufacturer or carrier if they offer a warranty for the device.
